Weld overlay cladding is considered to be a cost effective engineering solution. Most of the corrosion resistant metals, like nickel, polymer, brass, copper and aluminum are costly materials and hence the overall cost of the production process increases if these materials are used to manufacture plant vessels.

The weld overlay cladding process from Crystal Industrial is a surface coating process which deposits corrosion resistant alloys like nickel, brass, copper, stainless steel or aluminum over base metals of low alloyed steel or carbon manganese steel.

Theses base metals are low cost materials and hence are cost effective. Thus using the weld overlay cladding process from Crystal Industrial you can get corrosion resistant equipment at low cost.

The alloy used for weld overlay cladding process from India depends on the purpose for which these are being used. For example, the copper alloy is used at Crystal Industrial for weld overlay cladding of system tools used in sea water. The nickel alloy is used for weld overlay cladding of service valves, pumps and seals exposed to brackish water.

Stellite is another exotic alloy used at Crystal Industrial for weld overlay cladding of equipment which need to be both corrosion resistant and wear resistant.

The weld overlay cladding process from Crystal Industrial varies in thickness. You can specify the degree of cladding thickness depending on the aggressive environment where these are going to be used. The thickness of weld overlay cladding from India vary between 2 mm to 20 mm thickness.

Hence now get durable and corrosion resistant system tools for your oil and gas industry at a short turnaround time.